Tales from the Bonfire - 20 Years, Four Months and 10 Days

by Sandy Reid | C-6557
Master Rigger and President of Rigging Innovations

It's always good when old friends that you haven’t seen in a while stop by to say, "Hi." It’s great to know that they’re still looking at the right side of the grass. So I was happy to see Mark Smith, who worked with me at Westgaard Parachute in South Laguna, California, in 1983, when he stopped by Rigging Innovations a few months ago.

We visited for a while when he said, "I have something for you that you might like." He returned a few minutes later with an early Talon 1 rig that had main and reserve canopies in it. It looked eerily familiar.

"You might like to check out the packing data card," he said with a sly grin. Opening the reserve flap, I immediately noticed the serial number of the rig: 101. I remembered we started numbering the first TSOed (FAA-approved) Talons at 101—this was the first legal rig Rigging Innovations had built in 1985! The reserve was still sealed, and the last entry on the card was dated "5 July 1991." The seal and signature were Mark's. He had stopped jumping 20 years ago, and this old Talon had been sitting in a cool, dry closet since then.

"What are you going to do with it?" he asked.

"Drop-test it, of course," I replied.

A couple of weeks later, I was talking to Bill Gargano, whose B. Gargano and Co. was one of the few ram-air canopy manufacturers in the 1980s and whose Hobbit reserve was one of the first seven-cell reserves. Bill is now chief engineer for Airborne Systems. I told him about wanting to drop-test the Talon and that the 20-year-old reserve canopy in it was Hobbit number 54.


Above: Bill Gargano (right) and Sandy Reid pose with the vintage Talon container and Hobbit reserve after the successful drop-test.
Below: The 20-plus-year-old pack job deploys beautifully.
Photos courtesy of Rigging Innovations.

At that point, Bill also got really fired up to drop-test the system. So on November 15—exactly 20 years, four months and 10 days since the last time it was packed—the Talon with its Hobbit reserve, carrying a 175-pound rubber dummy, slid out the rear of a Skydive Arizona Skyvan at 500 feet above ground level. The static line pulled the pin, and the reserve opened perfectly in less than two seconds.

After recovering the rig from a mesquite bush, we gave it a full inspection. Aside from some minor broken stitching, everything was perfect. The container and reserve will become part of the "mini-museum" in Rigging Innovations' loft.

For both Bill and me, it was a real trip down memory lane. It would appear that the technological advances we made 26 years ago are still alive and kicking in the industry today.





Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Dennis Luque
Sun, 02/07/2016 - 01:26

I had one of this, it was in a cool dry place too the serial number is 1009 and in color green and yellow (looks like a brazilian rig)

I don´t know if i can jump it what yoy recomend me? it have 14 jumps or something like that

chris b
Sun, 07/16/2017 - 15:03

I bought my first pc from sandy,who at the time i think 1982 was the general manager for westgaard in south laguna,a lifetime ago,,

Post new comment

Please provide your full name. We will not post responses from anonymous sources.
The content of this field is kept private and will not be shown publicly.
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.