What kind of hardware is best for my rig?

When choosing a new or used rig, the metal hardware used in the 3-ring assembly and for harness adjustments matters a lot. Inattention to this detail can make or break a good used gear deal. If you’re getting new gear, some of those great sales and discount deals might be due to hardware choice.

It’s all in the shine. Aside from a decade-or-so foray into nickel-plated hardware—a trip down the wrong road for the most part, since nickel plating chips—the choices are between cadmium-plated metal, which has a dull finish, or shiny stainless steel. Stainless steel makes a better choice across the board but of course costs more.

Manufacturing defects notwithstanding, all the hardware on your parachute system will take any load skydiving can deliver. But over time—and not much time in some locations—cadmium plating wears off, especially where the harness straps rub against it or where one metal part contacts another. Humidity mixed with industrial pollution can accelerate the degradation.

The worn plating leaves the steel underneath subject to rust. Unplated steel that is exposed to saltwater (e.g., from swooping on a beach) can rust and ruin a harness overnight. Any rust on a harness is a no-go, and both the rusted hardware and any webbing it contacted must be replaced. In some cases, the rig is done for good.

While stainless steel hardware adds anywhere from $150 to upwards of $300 to the price of a rig, it eases any concerns about rust and adds sparkle to your step. Most jumpers will settle for ordinary silvery stainless steel. But lately, black oxide plating has graduated from stealth for military rigs to high fashion. Expect it to rub off in the high wear spots over time, “which I think still looks pretty cool,” says Kelly Farrington, designer of the Velocity Sports Equipment Infinity. He offers black with the caveat that it may scratch. Since it’s stainless steel underneath, rust is no worry.

Stainless hardware did present some challenges for a time. Hardware that slipped when loaded became an issue. So along with the use of the new, smoother metal came new designs. The conventional floating-bar hardware works better with some harness and webbing combinations than others. Some rig manufacturers have addressed this problem with an additional layer of webbing. One hardware manufacturer offers a clunky looking spring-loaded design that keeps the floating bar tightly in position. On the two-piece paddle types of hardware that originated in France, it took a few tries for some manufacturers to dial in the configuration and tolerances. But on the whole, stainless-steel hardware has proven to be worth the extra expense—several hundred dollars per system in most cases—both in new and pre-owned equipment. It can greatly extend the useful life of a harness and container system (not to mention keeping dangerous metals from absorbing into our sweaty, acidic skin). If our little cottage industry had started out large enough to afford its own stainless-steel castings from the beginning, it’s likely we’d have never used cadmium-plated hardware at all. Now we don’t have to.

Kevin Gibson | D-6943 and FAA Master Rigger
Rahlmo’s Rigging in Orange, Virginia

Comments

Post new comment

Please provide your full name. We will not post responses from anonymous sources.
The content of this field is kept private and will not be shown publicly.
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.