Light Box

TRICKSOFTHETRADE20101-1Light tables can be a real help when working with canopy fabric, but they're a little bulky, especially for a rigger who works out of varying locations. Here's a more portable option: a light box. Just find, buy or make a plastic or glass box that will be big enough to light a worthwhile area, but small enough to fit inside most canopy cells. Install some small lights on one half of the interior of the box. LED lights are probably best, since they're highly shock resistant and give off almost no heat. A set from a big box store costs around $10. The top surface of the box can be translucent plastic for most purposes, but would have to be made of sturdy glass if any hot knifing will be done on it. A clear piece of glass or plastic can be made translucent by spraying a very light coat of white paint on the inside surface, which will help brighten and even out the light.

TRICKOFTHETRADE20101-2

—Gary Shaffer | D-21341
AFF Instructor, Coach Examiner, Master Rigger
Fairburn, Georgia

Comments

Post new comment

Please provide your full name. We will not post responses from anonymous sources.
The content of this field is kept private and will not be shown publicly.
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.